Til hovedinnholdet


STIM210 is a small, tactical grade, affordable, robust and reliable, ultra high performance (Bias Stability 0.3°/h, ARW 0.15°/√h) MEMS gyro module with up to 3 axes. An integrated 32-bit microcontroller enables flexible user configuration. Electronic axis alignment is standard. 

  • Miniature package
  • ITAR free
  • Excellent performance in vibration and shock
  • Excellent environmental robustness
  • 1, 2 or 3 axes offered in same package
  • Electronically calibrated axis alignment
  • RS422 interface
  • 24 bits resolution
  • Single-crystal silicon technology
  • Low bias drift
  • Low noise
  • 5 different sampling rates available
  • 5 different bandwidths available
  • LP filter -3dB frequency can be set individually for each axis
  • RS422 protocol, bit rate and line termination
  • Selectable output unit: angular rate [deg/s] or incremental angle [deg]
  • Continuous self-diagnostics


Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM210 may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Parameter Min Typ Max Unit Comment
Range ±400 °/s Other ranges available on request
Output 24 bit RS422
Bias instability 0.3 °/h
Angular random walk 0.15 °/√h
Sampling frequency 2000 SPS
Frequently asked questions

Looking for something?

Do you have any questions about our products? Take a look at our frequently asked questions. FAQ